Tascam US-2X2 TP Trackpack Recording Package Audio Interface


PRO AUDIO & DJ Audio Interfaces Tascam BRANDS Tascam
Tascam US-2X2 TP Trackpack Recording Package Audio Interface
VAT included

Be the first to review this product

Availability: Available

Tascam US-2X2TP

The new TASCAM TRACKPACK 2x2 assembles everything you need to record music on your computer. Included in the complete recording bundle is TASCAM’s US-2x2 USB audio interface, TM-80 studio condenser microphone with shockmount, and TH-02 headphones, plus Cakewalk SONAR X3 LE and Ableton Live Lite 9 DAW software.


Item Description

The new TASCAM TRACKPACK 2x2 assembles everything you need to record music on your computer. Included in the complete recording bundle is TASCAM’s US-2x2 USB audio interface, TM-80 studio condenser microphone with shockmount, and TH-02 headphones, plus Cakewalk SONAR X3 LE and Ableton Live Lite 9 DAW software.

The US-2x2 is a 2-in/2-out USB interface, bus powered from your Mac or Windows computer. A pair of Ultra-HDDA mic preamps provide up to 57dB of gain and the best noise and distortion specs in their class. The audio design features high-performance, musical components like NE5532 op amps for rich sound quality without coloring the source. Class-compliant drivers enable use with tablets like the iPad when using an optional power supply.

The US-2x2’s all-aluminum case features a pair of “bio-cell” side panels. In addition to their striking design, the side panels ergonomically angle the interface towards you to make the switches and knobs easier to read on a desktop. The US-2x2 includes MIDI in and out, balanced audio outputs, a headphone amp, and two DAW applications to choose from – both Cakewalk SONAR X3 LE and Abelton Live Lite 9. Included with the software are dozens of plug-in instruments, effects, and loops to get you started.

Also included is the TM-80, a condenser microphone ideal for vocals, drums, and acoustic instruments. The TM-80 includes a shockmount and desktop stand. The TH-02 closed-back headphones provide isolation while recording and a great reference during mixdown. 

US 2x2

Two Ultra-HDDA mic preamplifiers

Two XLR/TRS (MIC/LINE) inputs with full +48V phantom power

Two TRS analog balanced outputs

18mW/ch headphone output

USB bus-powered for mobile recording

NE5532 op-amps used at the audio input and output stages

Up to 96kHz/24-bit recording

Support for Windows and Mac OS X operating systems

USB 2.0 computer connection

Connect with iPads and other iOS devices

Microphone preamp gain range of 57 dB

Balanced analog TRS output jacks suitable for connection to powered monitors

Separate controls for line and headphones output volumes

MIDI input and output

Confirmed operation with major DAW software (SONAR, ProTools, Cubase, Live, Studio One, Garage Band)


Design  Closed-back dynamic

Frequency response      18Hz - 22,000Hz

Driver diameter                50mm

Sensitivity           98dB (+/-3dB)

Input impedance             32ohms

Max input power             600mW

Cable     9.8ft (3m) when fully extended

Plug       3.5mm(1/8") stereo mini plug

6.3mm(1/4") stereo phone plug adapter

Dimensions        180 (W) × 240 (H) × 90 (D) mm

7.1 (W) × 9.5 (H) × 3.5 (D) inch

Weight 298g / 0.7lb (With cable)


Transducer type               Condenser

Polar pattern     Cardioid

Frequency response      20 - 20,000 Hz

Output impedance          200ohm +/-30% (at 1kHz)

Load impedance               >1k ohm

Sensitivity           -38dB +/-2dB (0dB=1V/Pa at 1kHz)

Max SPL               136dB (at 1kHz=1% THD)

S/N ratio              77 dB

Output Connector           3-pin XLR male

Phantom Power Requirements 9 - 48VDC phantom power

Dimensions        48(W) × 165 (H) × 48 (D) mm

1.9 (W) × 6.5 (H) × 1.9 (D) inch

Weight 300g / 0.7 lb

Includes               shock mount, mini desk stand, mic cable (1.8m XLRM – XLRF)


Additional Information

Additional Information

Colour No
Category Audio Components
Brand Tascam
Manufacturer Tascam
EAN 00043774031757
Condition New
Product Tags audio interface, Tascam

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.