
Laney Ironheart IRT30-112 Guitar Combo Amplifier Ex Display
This amplifier has been on demo in our store and may have some signs of wear.
A thoroughly modern sounding 1 x 12” combo, high gain, lots of smooth compression and packed full of features, the IRT30-112 is an extremely versatile, aggressive sounding combo delivering plenty of low-end growl and punch. Featuring a full 3-channel pre-amp with clean, rhythm and lead channels, plus a footswitchable pre-boost section. The IRT30-112 also features a variwatts control, which allows you to get the tone you are after at any wattage level without compromising your tone.
On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life. The Vari-Watts control the signal level within the power amplifier, allowing it to be driven harder at lower volume levels. For full output power, running the power tubes at maximum levels, turn this control fully clockwise. To reduce output volume, turn this control to the left.
Pulling on each of the EQ control knobs will shift the response of each control as follows: Bass: Deep - This extends the low-end frequency response, resulting in a fuller, heavier sound for lower notes. Mid: Shift - This lowers the frequency range of the mid control to give a tighter sound. Treble: Shift - This broadens the Treble control frequency response, to give a rounder sound to higher notes, especially when used with thin sounding pickups.
Specifications:
Power: 30 watts RMS
Inputs: 1 x Jack
Channels: 3 - Clean, Rhythm & Lead
Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
Master Presence Control: Overall TONE
Boost Switch: Footswitchable PRE BOOST
Preamp Valves: 4 x ECC83
Output Valves: 2 x 6L6
Class: Class AB
Reverb: Laney designed Digital reverb
Footswitch: FS4-IRT supplied as standard - switches Channel, Clean, Reverb & Pre Boost
FX Loop(s): Yes - variable level FX loop
Output Attenuation: VARI WATTS feature
Impedance: 8 Ohms
Drivers: 1 x HH Custom Designed 12" driver
Baffle: Angled Baffle
Cabinet Design: Straight fronted
Speaker connections: 8 Ohm socket
Unit Dims - for int. case (HxWxD mm): 473 X 578 X 288
MP3 Input: YES
Weight: 20.5 Kg
Packed Dimensions (HxWxD mm): 536 X 636 X 346
DI Socket; Yes : selectable - Dry or Amped